Home page

Matters needing attention when cleaning the gas booster system

2021-11-09

gas booster system after use for a long time, its inside and outside will have a lot of dust, this time you need to clean the gas booster system, then in the cleaning gas booster system should pay attention to what matters?

1, can not use kerosene, alcohol or other corrosive liquid, in case of hydraulic components, oil tank and other components are corroded, affecting the normal use of the hydraulic device.

2. When cleaning the gas pressurization system, the operation of the hydraulic pump and the heating of the cleaning medium should be carried out at the same time. Because, when the temperature of the cleaning oil is 50 degrees Celsius to 80 degrees Celsius, the rubber residue in the system is easily removed.

3. Intermittent operation of the hydraulic pump can improve the cleaning effect.

4. We should install a filter on the circuit of the cleaning oil circuit of the gas booster system, so that most of the impurities in the system can be filtered out. The time to clean the hydraulic pump is generally between forty-eight hours and sixty hours, which is determined by factors such as the complexity of the system and the degree of pollution.

6. At the end of cleaning, do not stop the hydraulic pump immediately, but keep it running until the temperature of the hydraulic pump returns to normal, so as to prevent the external moisture from rusting the internal devices.

7. After cleaning the gas pressurization system, remove the cleaning oil in the circuit in time.

In order to extend the service life of the gas pressurization system, you must pay attention to the above-mentioned matters when cleaning the gas pressurization system in the future.

Related News